ASTM A333 Low Temperature Pipe

+86-13771005953 Inquiry@sunindustry.com

商品詳細

ASTM A333 低温パイプ

カテゴリー低温パイプ, 製品紹介, 鋼管

ASTM A333: American Society for Testing and Materials
Seamless Steel Pipe for Low-Temperature Service
サイズ1/8″～24インチ
WT スケジュール：SCH 10、SCH 20、SCH 40、SCH STD、SCH 80、SCH XS～SCH 160。SCH XXS
Length: Single Random Length, Double Random Length. 20ft. 40ft
Ends Types: Plain, Beveled

カテゴリー低温パイプ, 製品紹介, 鋼管

このアイテムを共有する：

商品詳細

Application: Oil, Gas and water delivery; Refinery, Boiler and Mechanical equipment manufacturer; structure construction; drilling, ship building and etc.

Element	構成, %
Element	Grade 1	Grade 3	Grade 4	Grade 6	Grade 7	Grade 8	Grade 9	Grade 10	Grade 11
Carbon, max	0.30	0.19	0.12	0.30	0.19	0.13	0.20	0.20	0.10
マンガン	0.40-1.06	0.31-0.64	0.50-1.05	0.29-1.06	0.90 max	0.90 max	0.40-1.06	1.15-1.50	0.60 max
Phosphorus, max	0.025	0.025	0.025	0.025	0.025	0.025	0.025	0.035	0.025
Sulfur, max	0.025	0.025	0.025	0.025	0.025	0.025	0.025	0.015	0.025
シリコン		0.18-0.37	0.08-0.37	0.10 min	0.13-0.32	0.13-0.32		0.10-0.35	0.35 max
ニッケル		3.18-3.82	0.47-0.98	0.40 min	2.03-2.57	8.40-9.60	1.60-2.24	0.25 max	35.0-37.0
クロム			0.44-1.01	最大0.30				最大0.15	最大0.50
Copper			0.40-0.75	0.40 ,ax			0.75-1.25	最大0.15
アルミニウム			0.04-0.30					0.06 max
Vanadium, max				0.08				0.12
Niobium, max				0.02				0.05	最大0.50
Molybdenum, max				0.12				0.05
Cobalt									最大0.50

引張要件

	Grade 1		Grade 3		Grade 4		Grade 6		Grade 7		Grade 8		Grade 9		Grade 10		Grade 11
	psi	マーパ	psi	マーパ	psi	マーパ	psi	マーパ	psi	マーパ	psi	マーパ	psi	マーパ	psi	マーパ	psi	マーパ
Tensile strength, min	55000	380	65000	450	60000	415	60000	415	65000	450	100000	690	63000	435	80000	550	65000	450
Yield strength, min	30000	205	35000	240	35000	240	35000	240	35000	240	72000	515	46000	315	65000	450	35000	240
	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi-tudinal	Trans-verse	Longi- tudinal
Elongation in 2 in. or 50 mm, (or 4D), min, %: Basic minimum Elongation for walls s/e in. [8mm] and over in thickness, strip tests, and for all small sizes tested in full section	35	25	30	20	30	16.5	30	16.5	30	22	22		28		22		18
When standard round 2-in. or50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used	28	20	22	14	22	12	22	12	22	14	16				16
For strip tests, a deduction for each in. [o.8 mm] decrease in wall thickness below s/e in. [8 mm] from the basic minimum elongation of the following percentage	1.75	1.25	1.50	1.00	1.50	1.00	1.50	1.00	1.50	1.00	1.25		1.50		1.255