ASTM A213 Boiler Tube

+86-13771005953 Inquiry@sunindustry.com

产品详情

ASTM A213 锅炉管

For manufacture wall panel economizer, Re-heater, Super heater and stem pipe line of boilers.
Standard Steel Grade: ASME/ASTM SA/A213/T5/T11/T12/T22/T91

类别锅炉管, 产品, 钢管

分享此项目：

产品详情

尺寸范围

O.D 1/4″-24″; W.T SCH10-SCH160;

Chemical Composition Limits, %4 , for Low Alloy Steel

Chemical Composition Limits, %4 , for Low Alloy Steel
等级	UNS Designatlion							构成，%
		Carbon	锰	Phosphorus	Sulfur	硅	镍	铬	Molybdenum	Vana- dium	Boron	Niobium	Nitrogen	铝质	Tungsten
T2	K11547	0.10-0.20	0.30-0.61	0.025	0.025B	0.10-0.30	…	0.50-0.81	0.44-0.65	…	…	…	…	…	…
T5	K41545	0.15	0.30-0.60	0.025	0.025	0.50	…	4.00-6.00	0.45-0.65	…	…	…	…	…	…
T9	K90941	0.15	0.30-0.60	0.025	0.025	0.25-1.00	…	8.00-10.00	0.90-1.10	…	…	…	…	…	…
T11	K11597	0.05-0.15	0.30-0.60	0.025	0.025	0.50-1.00	…	1.00-1.50	0.44-0.65	…	…	…	…	…	…
T12	K11562	0.05-0.15	0.30-0.61	0.025	0.025B	0.50	…	0.80-1.25	0.44-0.65	…	…	…	…	…	…
T17	K12047	0.15-0.25	0.30-0.61	0.025	0.025	0.15-0.35	…	0.80-1.25	…	0.15	…	…	…	…	…
T21	K31545	0.05-0.15	0.30-0.60	0.025	0.025	0.50-1.00	…	2.65-3.35	0.80-1.06	…	…	…	…	…	…
T22	K21590	0.05-0.15	0.30-0.60	0.025	0.025	0.50	…	1.90-2.60	0.87-1.13	…	…	…	…	…	…
T23	K40712	0.04-0.10	0.10-0.60	0.030	0.010	0.50	0.40	1.90-2.60	0.05-0.30	0.20-0.30	0.0010-0.006	0.02-0.08	0.015	0.030	1.45-1.75
T24	K30736	0.05-0.10	0.30-0.70	0.020	0.010	0.15-0.45	…	2.20-2.60	0.90-1.10	0.20-0.30	0.0015-0.007	…	0.012	0.02	…
T36	K21001	0.10-0.17	0.80-1.20	0.030	0.025	0.25-0.50	1.00-1.30	0.30	0.25-0.50	0.02	…	0.015-0.045	0.02	0.05	…
T91	K900901	0.07-0.14	0.30-0.60	0.020	0.010	0.25-0.50	0.40	8.0-9.5	0.85-1.05	0.18-0.25	…	0.06-0.10	0.030-0.070	0.02	…
T92	K92460	0.07-0.13	0.30-0.60	0.020	0.010	0.50	0.40	8.5-9.5	0.30-0.60	0.15-0.25	0.001-0.006	0.04-0.09	0.030-0.070	0.02	1.5-2.00
T122	K91271	0.07-0.14	0.70	0.020	0.010	0.50	0.50	10.0-11.5	0.25-0.60	0.15-0.30	0.0005-0.005	0.04-0.10	0.040-0.100	0.02	1.50-2.50
T911	K91061	0.09-0.13	0.30-0.60	0.020	0.010	0.10-0.50	0.40	8.5-9.5	0.90-1.10	0.18-0.25	0.0003-0.006	0.06-0.10	0.040-0.090	0.02	0.90-1.10

Hardness Requirements:

Brinell, Vickers, or Rockwell hardness tests shall be

made on specimens from two tubes from each lot.

Flattening Test- One flattening test shall be made on specimens from each end of one finished tube, not the one used for the flaring test, from each lot.
Flaring Test- _One flaring test shall be made on speci-mens from each end of one finished tube, not the one used for the fattening test, from each lot.
Mechanical property requirements do not apply to tubing smaller than /8 in. [3.2 mm] in inside diameter or thinner than 0.015 in. [0.4 mm] in thickness.

产品详情

ASTM A213 锅炉管

产品详情

联系我们

我们的产品

ISO 15156 管线管

ASTM A210 锅炉管

Nace MR0175 管道

ASTM A192 锅炉管